Why users need OhmLegs?

"Safety" and "efficiency" are the primary considerations in developing ohmlegs.

Computer professionals agree that minimum resistance in removing a connector is essential for good maintenance of a computer. Generally speaking, to remove an old-fashioned connector with minimal damage, one should hold the computer with one hand while gently tugging at the connector with the other ( According to the Molex® Manual, one pin of the connector has a holding force of 2.5 kg of friction. Therefore, in order to remove a 4 pin connector, a 10kg resistant force needs to be overcome ) However, office space and time rarely allow for such a maneuver. Consequently, staff resort to jerking and pulling at the connector, which over a period of time leads to damage of the components – not to mention the blown fuse in the operator!